Dual Layer Rubber Work Surface Mat

   This rubber matting has an easy-to-clean, pebbled surface. The mat's surface resistivity and resistance-to-ground values are in the 106 to 108 (< 1 x 109) ohms range; providing safe, effective dissipation of static charges and meeting ESD Association Guidelines. The dual layer rubber mat's effectiveness and durability provide outstanding long-term value.

  • Embossed finish for easy cleaning
  • Resistant to hot solder
  • Chemical resistant
  • Available in dark blue or grey
  • Conductive layer for effective dissipation

   3 Layer Vinyl Work Surface Mat

   These three layer vinyl mats provide excellent ESD protection at a low cost. The top layer is a dissipative vinyl with an easy-to-clean embossed texture. The foamed bottom vinyl layer is also dissipative. A buried conductive layer ensures good resistance-to-ground values. Overall thickness is 0.125".

  • Cushioned for comfort and device protection
  • Dissipative top and bottom layers
  • Available in light blue or grey
  • Conductive layer for dependable dissipation

   Dense Vinyl Tray Mat Work Surface Mat

   This economical rugged vinyl is twice as dense as our cushioned three layer material. The material was originally developed for tray lining where its toughness and non-skid properties were required. It's durability, low cost and effective dissipation (includes a buried conductive layer) have led to its use in other applications such as table mats.

  • Rugged 0.060" dense vinyl
  • Dissipative surface protects against rapid discharge Keeps pc boards from sliding.
  • Economical & effective table mat
  • SM-3001 mat (16-1/4" x 24" with round corners) fits many transport systems standard tray sizes

staticTech Runner System
FM-7006 (top)
FM-7005 (middle)
FM-7006 (bottom)

   This durable rubber mat is heat and chemical resistant. FM-7000 is available as an interlocking 3' wide runner system or as a stand alone 2' x 3' mat. The molded rubber has beveled edges to reduce tripping hazards common with floor mats. Surface resistivity is less than 9 x 105 ohms/sq.

  • Rugged Molded Conductive SBR Rubber
  • Available as 2' x 3' Stand-alone Mat Or Interlocking Runner System.
  • 1/2" Thick Mat With Beveled Edges
Deck Plate Surface Texture
staticTech FM-7000 - 2' x 3' floor mat with one 10mm snap - beveled 4 sides
FM-7005 - 2' x 3' center section with one 10mm snap - beveled both two 2' sides
FM-7006 - 2' x 3' end section with one 10mm snap - beveled both two 2' sides and one 3' side